BigRig Classics is sponsored by Previous Dominion Freight Line — Serving to the World Hold Guarantees. Study extra right here.
The primary concrete vessel was a rowboat in-built 1848.
Frenchman J.L. Lambot on the time constructed a sequence of rowboats utilizing a process he known as “Fericement.” Fericement is a forerunner of what’s recognized at the moment as ferro-cement. It is because metal rods are used to type a wire mesh that creates a skeleton of the ship’s hull, over which concrete is poured to type the hull.
You will need to word that concrete is made by mixing cement, sand and water. Thus, we can’t say a vessel is cement, however concrete. By the way one among Lambot’s rowboats remains to be afloat within the Netherlands.
The primary sensible seagoing ship of concrete was the 84-foot motorship Namsenfjord, which was designed and constructed by Norwegian shipbuilder N.Ok. Fougner. He started with the development of concrete lighters (barges) primarily based on a 1912 patent. The Namsenfjord was accomplished in 1917 and authorised by classification societies that very same 12 months.
The doorway of the U.S. into World Conflict I and the heavy lack of transport by submarine warfare precipitated the U.S. Delivery Board’s embarking on a large-scale metal shipbuilding program. Resulting from a scarcity of metal and the truth that a hull fabricated from concrete requires a few third much less metal per deadweight ton in comparison with a metal ship, concrete ships turned necessary to the warfare effort.
Right now, San Francisco businessman L. Comyn, who acknowledged the futility of constructing wood ships from inexperienced lumber and the final lack of shipyard proximity to metal crops, proposed constructing vessels with concrete hulls to the U.S. Delivery Board.
Seeing little curiosity from the federal authorities, Comyn established the San Francisco Shipbuilding Co. at Redwood Metropolis, California. In September 1917, he began development and by March 1918, the steamship Religion was christened. On the time, it was the most important concrete ship on this planet and the primary in-built America. The Religion was a single screw steamer of three,427 gross tons. The triple growth engines powered the ship to 10 knots.
San Francisco Shipbuilding used deformed bars supplied with lugs to acquire the optimum bond between metal and concrete. The facet and backside slabs had been 4 to 4.5 inches thick, bolstered diagonally; the shelter deck slabs had been 3 to three.5 inches thick and there have been seven watertight bulkheads of concrete. Poop, bridge, forecastle and primary decks, nevertheless, had been constructed of wooden, as had been the ceilings of the cargo holds. The steamer’s hull was fairly blunt. On the time, it value the shipyard $750,000 to construct the Religion.
The U.S. Delivery Board took discover and determined to construct 38 concrete ships. Solely 12 had been accomplished. The primary two, each 2,450 deadweight tons in measurement, had been constructed on an experimental foundation — one at North Seaside, New York, and the opposite at Brunswick, Georgia. Each had been delivered in 1919.
The remaining 10 ships had been constructed by the Emergency Fleet Corp. with shipyards at Wilmington, North Carolina; Cell, Alabama; San Diego and Oakland, California; and Jacksonville, Florida. Eight had been accomplished as 7,500-ton tankers by the shipyard.
These ships didn’t sail lengthy, since there was a glut of tonnage after the warfare and being of heavy development weren’t economical to function. Most of those concrete ships had been utilized as breakwaters or piers by the early Nineteen Twenties.
Over the subsequent 20 years, solely three concrete tankers of 298 ft lengthy had been constructed for the France and Canada Oil Transport Co.
After the dismal deployment of concrete steamers throughout the First World Conflict, most U.S. shipyards throughout World Conflict II shied away from utilizing concrete hull development regardless of the renewed scarcity of metal.

In 1942, a shipyard at Hookers Level in Tampa, Florida, was tasked by the U.S. authorities to construct 24 concrete dry-bulk ships to move sugar. These vessels, with their six cargo holds, measured 350 ft in size, 54 ft in beam and 35 ft in depth. Their concrete sides had been 6.5 inches thick with 4 layers of reinforcing metal. The ships had been simply recognized by three rows of wood fenders on their sides.
All 24 of those concrete ships bore the names of outstanding people of the cement business. The primary of the fleet was the David O. Saylor, which was delivered in November1942 to Lykes Bros. Steamship Co. of New Orleans.

The remaining ships, though owned by the U.S. authorities, had been operated by different business steamship corporations for a interval earlier than being acquired by the Military to be used as retailer ships or coaching ships within the South Pacific throughout the warfare.
By 1950, all 24 concrete ships had been both scrapped or sunk as breakwaters at Kiptopeke, Virginia; Newport, Oregon; and Powell River, Canada.

Of the roughly 50 concrete ships constructed within the U.S. throughout the previous century, the Religion was probably the most commercially profitable, with three years in service. The ship sailed the Pacific, Mediterranean and Atlantic earlier than it turned a breakwater in Cuba throughout 1922.
However that was not the ultimate story for ferroconcrete ship development. In actual fact, quite a few small vessels, barges and yachts at the moment proceed to be constructed with concrete. Moreover, prestressed and pretensioned concrete development has been also used in pontoon bridges, offshore petroleum manufacturing and storage services.
Click on for extra Maritime Historical past Notes articles by Capt. James McNamara.
The publish Maritime Historical past Notes: Ships of concrete appeared first on BigRig.


